kab-pro Posted March 12, 2019 Report Share Posted March 12, 2019 Bought used bike at deep autumn of 2018. Previous owner was second place owner of UK MX1 championship. According to information bike had about 30 hours and it looked accordingly. What can you say there a lot, what is in the belly indeed. Remaining time of autumn I spent for MX and trail riding to have a fun. Winter passed to convert bike into SM. You know, sm triples, suspension works, slipper, clutch basket, fresh piston and other small stuffs. Inside of the engine looked as new, conrod without any free play. Even OEM clutch looked nice. One word to say perfect. I made intake port surface smoothing and scanned it for future research. Last season I spent at competitions and accumulated almost 30 hours. Schedule for this winter was to swap the piston and to take next step with head improvements. 4 1 Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 12, 2019 Author Report Share Posted March 12, 2019 I apologize for the mistake regarding the purchase time. I got this at autumn of 2017. Short before last Christmas I tear down top end for piston change, once again checked con-rod, to see is there any progression with con-rod free play. Con-rod was at the same condition as it was half a year ago. Taking in to account well known traditional problem with what facing high hours and rebuilt crankshafts I decided to check what is going on with crank bearings at about 80 hours just for interest. Honda's crankshafts are traditionally problematic with left-hand roller bearing inner rim. Usually bottom rebuild means swap of bearings and con-rod, but the left inner circle remains oem because it cannot be removed without pulling out cam-chain drive sprocket which is not easy. Even more, to reinstall drive gear at correct position is almost impossible. So the inner circle is getting worse and worse and "half" of new bearing doesn't help at all, free play constantly increasing, engine became noisy. And to my surprise this is what I discovered.... damn, why and how VID_20190115_204048.mp4 Quote Link to comment Share on other sites More sharing options...
dr.-hasenbein Posted March 12, 2019 Report Share Posted March 12, 2019 Hey to LV Why ? -> build by stupid enginer without practice in repair Its like Husky camshaft with beerings behind the fixed timinggear Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 12, 2019 Author Report Share Posted March 12, 2019 vor 2 Stunden schrieb dr.-hasenbein: Hey to LV Why ? -> build by stupid enginer without practice in repair Its like Husky camshaft with beerings behind the fixed timinggear I do not think they are fools, red ones don't have con-rods at spare parts list at all. They foreseen to swap whole crank. The same way all Japan 4 thinking. Guys from aftermarket thinking differently and has their own opinion. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 12, 2019 Author Report Share Posted March 12, 2019 Anyway my plan was to tear down engine at next winter for complete rebuild. Clearly seems that schedule got significant changes as well as budget So I started tear down engine and check opposite side. Heheheh, damn VID_20190118_214606.mp4 Quote Link to comment Share on other sites More sharing options...
raserchen Posted March 12, 2019 Report Share Posted March 12, 2019 vor einer Stunde schrieb kab-pro: VID_20190118_214606.mp4 Man sieht man auf dem Video nichts. Aber... alle 30Std. Etc. Std. den Kolben tauchen ist eigentlich nicht nötig. Bei 4T sollte 100Std. machbar sein. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 13, 2019 Author Report Share Posted March 13, 2019 It is absolutely clear that the crankshaft bearings are not in order. The engine is teared down completely, next discoveries and surprises follows. First I noticed this, mist bearing position locks. It looks like both pump was something to chewed. 1 Quote Link to comment Share on other sites More sharing options...
dr.-hasenbein Posted March 13, 2019 Report Share Posted March 13, 2019 (edited) Hmmm... "Discovery Chanel" in real fuuuck... good idea to look a bit deeper Edited March 13, 2019 by dr.-hasenbein Quote Link to comment Share on other sites More sharing options...
Ben Posted March 13, 2019 Report Share Posted March 13, 2019 Very interesting Andis! How about uploading the videos to Vimeo? I use it and it works quite well. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 13, 2019 Author Report Share Posted March 13, 2019 vor 34 Minuten schrieb Ben: Very interesting Andis! How about uploading the videos to Vimeo? I use it and it works quite well. I' ll try to do so. Quote Link to comment Share on other sites More sharing options...
Guest Connader Posted March 13, 2019 Report Share Posted March 13, 2019 Hi Andis, recently I read something about a misdesign of Oil-Volume in our models. New 19'er has more engine oil and professional AMA-Teams used to put 200ml more oil than recommended, in 17/18 as well. The issue was more related to fastly burnt clutches rather than fatal engine failures though, but you never know. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 14, 2019 Author Report Share Posted March 14, 2019 vor 15 Stunden schrieb kab-pro: I' ll try to do so. Alright, both video's are at vimeo. 1 Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 14, 2019 Author Report Share Posted March 14, 2019 1 Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 14, 2019 Author Report Share Posted March 14, 2019 vor 14 Stunden schrieb Connader: Hi Andis, recently I read something about a misdesign of Oil-Volume in our models. New 19'er has more engine oil and professional AMA-Teams used to put 200ml more oil than recommended, in 17/18 as well. The issue was more related to fastly burnt clutches rather than fatal engine failures though, but you never know. Yes, oil is open issue. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 14, 2019 Author Report Share Posted March 14, 2019 And now pay attention to crankshafts necks. Roller side itself doesn't much surprise excluding huge wear. In video you can hear knocking, it describe how big this wear is. By the way knock test was done with oil film on parts. But ball bearing (right side) seat place looks very interesting. Didn't seen such meltdown before and this makes me wondering, what was the reason. 1 Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 27, 2019 Author Report Share Posted March 27, 2019 Treasure box. And Work bin. 3 Quote Link to comment Share on other sites More sharing options...
F41TH Posted March 27, 2019 Report Share Posted March 27, 2019 about the ball bearing seat: https://de.wikipedia.org/wiki/Passungsrost Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 30, 2019 Author Report Share Posted March 30, 2019 Oem crank halves casing and processing quality visually could be better. 1 Quote Link to comment Share on other sites More sharing options...
Guest Connader Posted March 30, 2019 Report Share Posted March 30, 2019 Hi Andis, the new is also OEM or aftermarket? Color of Conrod looks slighty lighter.....!?! Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 31, 2019 Author Report Share Posted March 31, 2019 vor 16 Stunden schrieb Connader: Hi Andis, the new is also OEM or aftermarket? Color of Conrod looks slighty lighter.....!?! Both are OEM. Right one has some history. Unfortunately 17 + doesn't have aftermarkets jet, but as the new one OEM costs 260$ only this isn't an issue at all. Quote Link to comment Share on other sites More sharing options...
Ben Posted March 31, 2019 Report Share Posted March 31, 2019 260 for the conrod or the whole crankshaft assembly? Quote Link to comment Share on other sites More sharing options...
Guest Connader Posted March 31, 2019 Report Share Posted March 31, 2019 I guess the whole assembly....?! Honda prices are strange: 74,- Bucks for a Ti-Valve but 28,- for a clutch-cover gasket (the big one). Quote Link to comment Share on other sites More sharing options...
Ben Posted March 31, 2019 Report Share Posted March 31, 2019 ? Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 31, 2019 Author Report Share Posted March 31, 2019 vor 5 Stunden schrieb Ben: 260 for the conrod or the whole crankshaft assembly? https://www.bikebandit.com/oem-parts/detail/honda/13000-mke-a00/b4297263?m=158991&sch=993322 I got form partzilla for 260, whole crank. Quote Link to comment Share on other sites More sharing options...
kab-pro Posted March 31, 2019 Author Report Share Posted March 31, 2019 vor 3 Stunden schrieb Connader: I guess the whole assembly....?! Honda prices are strange: 74,- Bucks for a Ti-Valve but 28,- for a clutch-cover gasket (the big one). EU market is something understandable , because crank at EU is about 850-900 Eur instead off ~ 240 Eur in US. I can't find any argue why I have to bye it in EU market. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.